• Deepa Sharma

Tasks to Completely Maintain your Brake System

The braking system of any vehicle is exceptionally complex; however, it is surprisingly simple to maintain yourself. It is very important to have a car brake service inspect your car and make the necessary repairs to ensure all parts of your vehicles are working properly. These parts can include the master cylinder, rotors, brake pads, and calipers. Your vehicles come with a recommended brake maintenance schedule in the manual. Nonetheless, a good rule of thumb is to check the brake pads after every 12,000 miles. You must also replace your fluid after every 25,000 miles. These estimates heavily depend on your car and your driving style.

Check Brake Pads and Rotors

Your car’s brake pads and rotors are the points of contact between your vehicles’ braking system as well as your tires. These components deteriorate quickly that all the other components and need more frequent maintenance. The friction between the tires along with the brake pads causes heat, and this heat wears down your car’s brake pad. It is also very important to inspect the quality and depth of the pads to ensure there is adequate resistance. If you believe you need to depress your brake pedal further or smell a burning stench, or the distance it requires to stop increases hugely, it might be time to get your brake pads properly and rotors checked by a tire brake service.

Flush Your Brake Fluid

Once you depress your brake pedals, the pressure builds and transfers through the brake fluid from the master cylinder, on to the brake line and then into the calipers. This then transfers the pressure to the brake pads and rotors. Brake fluid is extremely important as it acts as the bridge between you and your car’s Braking system. The moisture in the braking fluid can lead to corrosion of the metal constituents of the brakes and thus reduces the boiling point of the fluid, which also affects the effectiveness of the brakes. Brake fluids must also be checked and changed after every 25,000 miles driven. If you notice your brake fluid is cloudy or milky, you must get it changed immediately.

Bleed the Brake Lines

Apart from flushing the brake line so as to change the brake fluid, it is also an excellent idea to bleed the brake line and remove excess air. Once small amounts of air are trapped inside the brake line, it can also reduce the efficiency of your car’s braking system. Bleeding the system helps remove air from the brake line by depressing the brake pedals and adjusting the bleeder valve. This process should be carried out after every two to three years.

Chandler West’s Autos’ Brake Repair services can help you out! Contact us today if your breaks are not functioning properly.


Designed and Maintained by

Sarthak Bhardwaj of Basis Scottsdale High School

©2019 by Chandler West Emission and Auto Repair.